Close icon Close icon

PROBEXe Borehole Dilatometer



The PROBEXe rock pressuremeter or dilatometer is a radially expandable borehole probe used to determine in situ the deformability of rock mass and the creep properties of very soft rock.



The dilatometer test is a loading test run inside a borehole with a radially expandable cylindrical probe. It is used to determine in situ the deformability of rock mass and the creep properties of very soft rock. The PROBEXe determines the deformations by measuring the total volume change of the probe. This method is the same well-proven method used with the pressuremeter. It provides a mean modulus value of a large volume of rock, contrary to the use of callipered probes which can be affected by local heterogeneities. The volume changes of the probe are measured by monitoring the displacement of a piston. This configuration eliminates the parasitic expansion of the tubing and pumping system. The PROBEXe is a versatile equipment that posses characteristics of a rock pressuremeter and of a flexible dilatometer.

The PROBEXe consists of:

  • An inflatable membrane mounted on a steel core
  • A hydraulic module comprising a dual piston and cylinder

assembly, to inflate and deflate the membrane

  • A measuring module containing a linear transducer, which monitors the injected volume
  • The hydraulic and electrical lead lines
  • A hydraulic hand pump and pressure gauge
  • A pressure transducer
  • A readout unit consisting of the DP Box unit operated with an Android tablet. This versatile readout is compatible with other pressuremeters manufactured by Roctest. A special application, installed on the tablet, allows configuring the tests and calibrations, to read and plot the test results in real-time, to log the data, and to review test results.

Test & Interpretation

The leads are threaded inside a B-size casing or NQ rods that are used to lower the probe to test depth. The tests are stress controlled. Increments of pressure are applied in stages using the hand pump. The probe compressibility and inertia are previously determined by running  calibrations. The hybrid nature of the PROBEXe allows to use it according to testing sequences and interpretation methods associated to pressuremeters or flexible dilatometers. However, the results obtained in very hard rock with this equipment should be used with precautions. The method used to reduce the data is the same one used for pressuremeter data. It is based on Lame’s equations and yields a mean modulus of deformation for the rock mass tested. A tool (ProbexCompanion) developed by Roctest can be used for determining this modulus.



Maximum pressure 30 000 kPa
   Minimum (deflated) 73.7 mm
   Maximum (inflated) 85.5 mm
Effective length 457 mm
Probe upper threads BW Casing box + NQ rod adapter
Function Volume and pressure indicator
User interface Bluetooth communication with an Android tablet
  Diametrical change 0.001 mm (0.01 cc)
  Pressure 0.25 % F.S.
Logging capacity Typically over 10 000 data sets (tablet-dependent)
Power supply interface Universal AC wall plug with US/Euro adapter + adapter cable for car (lighter) and for external battery
Operating temperature -20 to +70 deg. C
Autonomy > 8 hours
Battery 2 x 12 V 2.3 A, rechargeable
Case Waterproof, shock resistant ABS plastic
Dimensions 25 x 28 x 12 cm (l x w x h)
Ordering Info

Please specify:

  • Cable / Tubing length (50, 100, 150 or 200 m)
  • Optional accessories

Optional Accessories:

  • Membranes
  • NQ or BW to AW rod slotted adapter
  • Cable & tubing extension


Down arrow

Search Smartec