SHIELDED 2 TO 12 CONDUCTORS
RUBBER, PVC, PE OR PU JECKETS
FOR A VARIETY OF APPLICATIONS
Instrumentation cables are used with every electrical transducers for a wide variety of appli cations and environments.
ELECTRIC CABLES
Roctest offers a large selection of electric instrumentation cables. Typical cables are made of twisted shield pairs of conductors and have a copper drain. Particular cables, such as vented or reinforced cables, are used for specific applications.
SPLICES
Splicing kits are used to repair damaged electrical cables or to add length to them. Splices are performed by using a splice kit which includes a stainless steel or PVC sleeve with watertight connectors.
Cable splicing should be done only when absolutely necessary; a splice is not always as solid or watertight as the cable itself.
LIGHTNING PROTECTION
Lightning protection is recommended to protect electrical equipment installed in regions with high risk of lightning. Lightning problems can be minimized with good instrumentation grounding methods, shielding wiring and components, and surge protection. This latter protection consists in adding gas tubes surge arrestors and transorbs diodes into a protection box for use with a single transducer (Model SPT), or unto a board for use with up to 40 VW transducers with no thermistor (Model SPU).
|
MODEL |
DESCRIPTION |
OD |
OUTSIDE JACKET |
|
IRC-21 |
2 conductors 18 AWG for direct burial |
7.5 mm |
Rubber |
|
IRC-31 |
3 conductors 22 AWG, copper drain |
3.7 mm |
PVC |
|
IRC-41A |
2 shielded pairs 22 AWG, copper drain |
6.4 mm |
PVC |
|
IRC-41AP |
2 shielded pairs 22 AWG, copper drain |
6.4 mm |
Polyethylene (PE) |
|
IRC-41AV |
2 shielded pairs 22 AWG, 1 nylon vent tube |
8.9 mm |
Polyethylene (PE) |
|
IRC-61A |
3 shielded pairs 22 AWG, Kevlar reinforced |
9.5 mm |
Polyurethane (PU) |
|
IRC-82A |
4 shielded pairs 22 AWG, copper drain |
8.5 mm |
PVC |
|
IRC-121 |
6 shielded pairs 20 AWG, copper drain |
11 mm |
PVC |
|
IRC-181 |
9 shielded pairs 22 AWG, copper drain |
12.7 mm |
PVC |
|
IRC-241 |
12 shielded pairs 22 AWG, copper drain |
11.7 mm |
PVC |
|
IRC-390 |
2 shielded pairs 22 AWG, copper drain, for direct burial |
10 mm |
PVC |
Please specify:
Optional Accessories:
