ACCURATE & ROBUST
COROSION RESISTANT
DOUBLE COIL
Accurate, robust and corrosion resistant, the C-110 Strain Gauge is built with electro-magnetic excitation and pick-up coils.
The C-110 strain gauge consists of a thin-wall steel tube with two steel heads soldered to its extremities using solder with a low modulus of deformation. The distance between flanges of the heads determines the gauge length. A small rectangular housing at the gauge midsection encloses the electro-magnetic excitation and pick-up coils.
The electrical resistance of one of the electromagnetic coils provides temperature data, in which case the gauges are delivered with a 5-conductor cable. A 4-conductor cable is used when temperature measurements are not required.
Unless specified, gauges are factory-set at mid-range, allowing one half of the range for measurement of tensile strain, and the other half for compressive strain.
Specifications
|
MODEL |
C-110 |
|
Range |
2900 με |
|
Average resolution using PC readout |
0.35 με |
|
K strain gauge coefficient |
0.3 |
|
Resistance of each coil |
90Ω |
|
Signal specifications |
|
|
Input signal |
Sinusoidal, 150 to 170 mV rms |
|
Output signal |
Sinusoidal, 10 to 30 mV rms |
|
Total length |
144 mm |
|
Gauge length |
110 mm |
|
Tube diameter |
6 mm |
|
Flange diameter |
20 mm |
|
Weight (without cable) |
85 g |
Please specify:
